16.8V 2A smart Li-ion battery charger for 14.8V Li-ion battery pack model 3PL2016

Battery charger specifications:
NO. | ITEM | UNIT | SPECIFICATION | REMARK | |||
INPUT | |||||||
01 | Rating input voltage | V ac |
100~240V ac 50/60Hz |
||||
02 | Input voltag range | V ac | 90~264V ac | ||||
03 | Rating input current | A | 0.3Arms |
INPUT:220V OUTPUT:Full load |
|||
04 | Max. input power | W | 40 | ||||
OUTPUT | |||||||
05 | Rating output voltage | V dc | 16.8V | ||||
06 | Output voltage range | V dc | 13.2V dc~16.95V dc | ||||
07 | Suit with battery type | Ah | 14.8V 2.0Ah~12Ah Li-ion battery | ||||
08 | Constant charge current | Amps |
1.9 ± 0.1A |
||||
09 | Constant voltage | V |
16.8 ± 0.15V |
||||
10 | Charge end current | A |
<0.2 |
||||
11 | Typical charge time | Hours | 4 Hours | For 4000mAh Li-ion battery pack | |||
12 | Max. outpout power | W | 35 | ||||
13 | Hold-on time | ms | 20 | ||||
14 | Ripple current | mA | 80 |
Input: 220Vac Output: Full load |
|||
15 | Charge finish condition | - |
V>16.8V + I<0.20A |
||||
16 | LED color | - | Red: Charging Green: Finish/idle | ||||
17 | Output short circuit protection | - | YES | ||||
18 | Efficiency | % |
>70% |
At Max. load | |||
ENVIRONMENT | |||||||
19 |
Operate temperature |
°C |
-10 ~ +40 |
Full load & natural convection |
|||
20 | Operate humidity | % RH |
< +90 |
Relative humidity, non-condensing |
|||
21 | Storge temperature |
°C |
-40 ~ +70 | ||||
22 | Storge humidity | % RH | 0 ~ +95 |
Relative humidity, non-condensing |
|||
23 | Cooling | - | Natural convection | ||||
24 | Temperature factor | % | - | ||||
25 | Vibration resistance | - |
5MM/50HZ/600S |
Non-operating condition |
|||
26 | Impact resistance | - |
1 meter drop test >= 3 times |
Non-operating condition |
|||
MECHANICAL | |||||||
27 | Weight | g | 170 | ||||
28 | Size | mm | 90*48*29 | Casing only | |||
29 | Connect cable | - | Defined when order | ||||
SAFETY | |||||||
30 | Max. temperature rise |
°C |
< 40 on casing |
At any line and Max. load | |||
31 | Safety standards | - |
GB4943 UL1950 EN60950 |
||||
32 | EMC stand | - | EN55022 B | ||||
33 | MTBF | Hours | 30000 | ||||
34 | Limited power source | VA | 50 | ||||
35 | ESD | kV | 8.0 | ||||
36 | Hi-Pot insulation | V |
i/p to o/p: 3000 (1 min.) |
For final unit, cut-off current =10mA |